主要用途与简绍/ Brief Introduction：

本制造制造线由全半自动理瓶机、滚桶式洗瓶机、无菌粗糙机、眼麻醉药装灌旋盖机、开式标贴制冷机组成，可进行理瓶、水、气的洗涤、烘干机及臭氧杀菌杀菌消毒、装灌、加塞、旋盖、标贴等制作工序，关键广泛用于眼麻醉药简答他小用药量水溶液的联线制造制造，也可单机手游独力适用。仍然相符合GMP标准要求。This production line consist of  Automatic Bottle Unscrambler,  Bottle Washing Machine, Tunnel Type Sterilization Drier, eyedrop filling machine, Vertical Labeling machine, can complete bottle sorting, water,and gas cleaning, drying and ozone disinfection, filling, plugging, capping, labeling, mainly used in eyedrops and other small doses of solution, also can be used single independently.　 Meet the GMP requirement.

优点和缺点/Characteristic：

滤油机组设计构思框架适当合理，作业不稳定性、装罐控制精度就越高，具全球你我业现代化标淮。完全性达到GMP标淮。     眼蓝药水分装旋盖机犹是我工司的最后代的产品，组队对话框设定，良好运动泵分装，由真空度吸机械性手代用气阀更加好的打塞，保护了不稳相关性性和符合标准率。使用恒功率旋盖，有无瓶不分装、无塞不上盖，无瓶无塞可自动化停止的技能。    It with reasonable structure, higher precision in filling, reaching the advanced level in domestic same business. Meet with requirement of GMP standard completely.eyedrop filling capping machine is a third generation product, human-machine interface operation, filling by peristaltic pump, replace air cylinder with vacuum drived manipulator for plugging, aquire higherstability and percent of pass. Constant torquecap screwing. No bottle no filling, no plug no capping and automatically stop if cap and plug is under-supply.   

技術性能/technical parameters：

适合规格参数/Bottle size	10-20ml
生产的性能/Capacity	40-60瓶/分  70-120瓶/分 40-60/  70-120 bottles/min
用水的气压/ Hydraulic Pressure Mpa	0.3Mpa
用供水量量 /water consumption	0.5 m3/h
无尘缩减的空气经济压力 /Clean compressed air pressure	0.6-0.8Mpa
超净解压缩气体用水量/Clean compressed air consumption	300 L/min
电压/Voltage	380V/50Hz
工作效率/Power	5.5 kw
出产线总长/Dimension	11000*1500*1900mm